www.35222.com

www.35222.com-35222vip

产品中心

JOVE

旋挖钻机

JVR150Z旋挖钻机

九五产品快速查询:

采用双折线绳槽卷筒,使各层之间的负荷均匀分布,大大延长了钢丝绳的使用寿命,提高施工安全性。
The double broken line groove drum is adopted to distribute the load evenly among the layers, which greatly extends the service life of the wire rope and improves the construction safety.
液压系统使用先进的负载反馈技术,可使流量按需分配到系统各个工作装置,实现各种工况下的最佳匹配,泵、马达、阀、油管及管接头均采用进口产品,确保高可靠性。
The hydraulic system uses advanced load feedback technology to distribute the flow to each working device of the system as needed to achieve the best match under various working conditions. The pump, motor, valve, tubing and pipe joint all adopt imported products to ensure high reliability.
专用底盘和上车,履带间距在3000-4000mm之间调整,增加配重重量,提高整机的稳定性和可靠性。
Special chassis and vehicle, track spacing is adjusted between 3000-4000mm, increase the counter weight and improve the stability and reliability of the whole machine.

机型 Model

JVR150Z

最大输出扭距 Max. output torque (KN.m)

150

最大钻孔深度 Max. drilling depth (m)

55

最大钻孔直径 Max. drilling diameter (mm)

1500

发动机生产厂家 Engine brand

Cummins

发动机型号 Engine model

QSB 7-C227

发动机功率 Engine power (KW)

169

主泵流量 Main pump flow rate

2×224 L/min@2100rpm

底盘型号 Undercarriage model

自制专用底盘

Self-made undercarriage

牵引力 Traction force (KN)

345

钻孔转速 Drilling speed (rpm)

6 - 38

最大加压力/起拔力 Max. crowd push force (KN)

150 / 160

加压系统行程 Stroke of sledge (mm)

4000

主卷扬提升力(第一层)Main winch pull (1st layer)

160

主卷扬绳直径 Main winch wire rope dia. (mm)

Φ26

主卷扬提升速度 Max. main winch line speed (m/min)

72

副卷扬提升力(第一层)Aux. winch line pull (1st layer) (KN)

50

副卷扬绳直径 Aux. winch wire rope dia. (mm)

Φ18

副卷扬提升速度 Aux. winch line speed (m/min)

110

工作状态设备宽度/高度 Overall width in drilling position (mm)

4000 / 20361

运输状态设备长度/宽度/高度 Overall L/H/W transport position (mm)

14559 / 3000 / 3440